TM9-2320-387-24-l
6-2. FRONT PROPELLER SHAFT ASSEMBLY MAINTENANCE (Cont’d)
piiixc-1
1.
2.
3.
4.
5.
Position front propeller shaft assembly (4) over exhaust pipe (10) and over top of transfer case (5).
Install front propeller sh& assembly (4) on difTerential pinion yoke (1) with two bearing straps (2)
and four capscrews (3). Tighten capscrews (3) to 13-18 lb-R (B-24 Nom).
Install center beaxing (17) on engine mount (19) with two washers (161, capscrews (181, washers (16),
and nuts (15). Tighten capscrews (18) to 60 lb-R 031 N-m).
Install transfer case shift rod (12) on transfer case shiB lever (6) with washer (13) and cotter pin (14).
Install front propeller shaR assembly (4) on transfer case output yoke (9) with two U-bolts (111, four
washers (81, and nuts (7). Tighten nuts (7) to 13-18 lb-R (1824 Nom).
6-4
