TM 9-2320-387-24-l
Table 2-1. Unit Level Preventive Maintenynce CheFks and Services HMMWV (Cont’d).
ITEM
INTERVAL
iTEM TO 8E
PROCEDURES
NOT FULLY MISSION
NO.
INSPECTED
CAPABLE IF:
12
Semi-
Engine and
c. Using 314-h torque adapter
c. TYansmission mount
annually
Transmission (appendix B, item 1341,
Mounts
loose, cracked, or
(Cont’d)
tighten two capscrews securing
damaged.
transmission mount-to-adapter to
65 lb-R (88 N-m). Tighten two locknuts
securing transmission mount-to-
crossmember to 28 lb-R (38 Nom).
CROSSMEMBER
13
Semi-
Starter
CAUTION
annually
Disconnect negative cable.
a. Inspect starter for mounting
security. Tighten mounting bolts to
a. Mounting bolt
40 lb-R (54 N*m).
missing or will not
torque.
b. Inspect cables and studs for loose
nuts and damage.
b. Stud nut loose.
14
Semi-
annually
Transmission a. Inspect vent lines and connectors
for security, cracks, and deterioration.
a Vent line cracked,
plugged, or missing.
b. Inspect transmission shift linkage
for bends, excessive play, cracks, and
b. Shift linkage is
unserviceable.
damage that could cause failure.
15
Semi-
Transfer
annually
Case
a. Inspect transfer ease vent lines and
a Vent line cracked,
connectors for security, cracks, and
deterioration.
plugged, or missing.
b. Inspect transfer case shift linkage
for bends, excessive play, cracks, and
b. Shift linkage is
unserviceable.
damage that could cause failure.
-
2-15
