TM 9-2320-387-24-l
4-21. BRAKE WARNING IAMP REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM g-2320-387 -10
automotive (Appendix B, Item 1)
TM 9-2320-387-24P
hfaterials/Parts
Equipment
Condition
Tape (Appendix C, Item 77)
l Battery ground cables disconnected (para. 4-68).
l Air restriction gauge removed (para. 3-171.
NOTE
Prior to removal, tag leads and note position for installation.
I[
1.
Remove two screws (2) from brake warning lamp (1) and instrument panel (5).
2.
Disconnect leads 67 (7) and 27 (3) from wiring harness leads (6).
3.
Slide brake warning lamp (1) down toward steering column (4) and remove brake warning
lamp (1).
b. Installation
NOTE
Place tape around lead wires to keep lamp in proper position
during installation.
1.
Install tape (8) around lamp (1) and lead wires (7) and (31..
2.
Slide brake warning lamp (1) up along steering column (4) and install brake warning lamp (1) on
instrument panel (5) with two screws (21.
3.
Connect leads 67 (7) and 27 (3) to wiring harness leads (6).
FOLLOW-ON TASKS: l Install air restriction gauge (para. 3-17).
l Connect battery ground cables (para. 4-68).
l Start engine (TM 9-2320-387-10) and check brake warning lamp for operation.
4-44
