TM 9-2320-387-24-l 4- 18. SPEEDOMETER CABLE REPLACEMENT I This task covers: a. Removal b. Installation INITIAL SETUP: TOOIS General mechanic’s tool kit: Equipment Condition l Hood raised and secured (TM 9-2320-387-101. automotive (Appendix B, Item 1) l Engine access cover removed (para. 10-22). Materials/Parts Locknut (Appendix G, Item 135) Tiedown strap (Appendix G, Item 464) Maintenance Level unit Manual References TM 9-2320-387-10 TM 9-2320-387-24P 1. Remove four screws (121 and washers (13) from instrument cluster (11) and instrument panel (101 and pull instrument cluster (11) away to gain access to back of speedometer (3). 2. Remove driveshaR nut (2) from speedometer (3). 3. Push cable (5) and rubber grommet (41 through body (8). 4. Remove locknut (61, screw (91, and clamp (7) from body (8). Remove clamp (7) from cable (51. Discard locknut (6). 5. Remove tiedown strap (14) from speedometer cable (5) and harness (16). Discard tiedown strap (141. 6. Remove speedometer cable (5) from adapter (15). b. Installation 1. Install speedometer cable (51 on adapter (151, ensuring core (11 engages in square hole of adapter (15). 2. Install tiedown strap (14) on speedometer cable (5) and harness (16). 3. Install cable (51 on body (81 with clamp (71, screw (91, and locknut (6). 4. Install cable (5) and grommet (4) on body (8). 5. Connect cable (51 to back of speedometer (31, ensuring core (1) engages in square hole in speedometer (3) and tighten driveshaft nut (21. 6. Install instrument cluster (11) on instrument panel (10) with four washers (13) and screws (121. 4-38
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business