TM 9-2320-387-24-l
1
ENGINE OIL FILLER TUBE MAINTENANCE
I
This task covers:
a. Removal
b. Inspection
c. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive
(Appendix B, Item 1)
hIaterials/Parts
Lubricating
oil (Appendix C, Item 44)
hIanua1 References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-102
Rlaintenance Level
Unit
1 a. Removal
1
1.
Loosen clamp (2) and disconnect CDR valve hose (1) from engine oil filler tube (3).
2.
Remove two nuts (41, washers (51, and engine oil filler tube (3) from timing chain cover (7) and studs (8).
-1
Inspect grommet (6) for breaks or cracks. Replace if defective.
c. Installation
1.
Coat grommet (6) with lubricating
oil.
2.
Install engine oil filler tube (3) on timing chain cover (7) and studs (8) with two washers (5) and
nuts (4). Tighten nuts (4) to 13-20 lb-ft (18-27 N=m).
3.
Connect CDR valve hose (1) to engine oil filler tube (3) and tighten clamp (2).
.-
0 6
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
3-4
