TM 9-2320-387-24-l
1 2-46. STEACE-F? TEST PROCEDURES
1
This paragraph will be helpful when using the STE/ICE-R to answer diagnostic
questions.
Use this
paragraph
as a reference
if you need additional
information
about a specific test. This paragraph
contains information such as possible errors, test procedures, control codes, and additional notes as
necessary. The following chart will help you find the test you need. The STE/ICE-R setup and internal
checks (Test No. GO1 ,
page 2-519) must be performed prior to performing tests. A complete description
and operation of the STEXE-R
is found on page 2-509. See TM 9-4910-571-12&P
for additional
information.
TEST NAME
TEST #
PAGE #
ENGINE RPM (AVERAGE)
POWER TEST (RPM/SEC)
POWER TEST (PERCENT)
COMPRESSION UNBALANCE TEST
FUEL SUPPLY PRESSURE (PSI)
PRESSURE (PSI) 0 TO 1,000
BAITERY VOLTAGE
STARTER MOTOR VOLTAGE
STARTER NEGATIVE CABLE VOLTAGE DROP
STARTER SOLENOID VOLTS
STARTERCURRENTAVERAGE
CURRENT FIRST PEAK
BAl-l-ERY INTERNAL RESISTANCE
STARTER CIRCUIT RESISTANCE
BATTERY RESISTANCE CHANGE
BATTERY CURRENT
DC VOLTAGE 0 TO 45 VOLTS
DC CURRENT 0 TO 1,500 AMPS
10
12
13
14
24
50
67
68
69
70
71
72
73
74
75
80
89
90
. . _^
2-490
2-491
2-492
2-493
2-494
2-495
2-496
2-497
2-498
2-499
2-500
2-501
2-502
2-503
2-504
2-505
2-506
2-507
RESISTANCE AND CONTINUITY 0 TO 4,500 OhMS
g,
2-508
-
2-489
