REFERENCE INFORMATION
Lubricate in accordance with
TM 9-2320-387-l
0.
Check for smooth operation
of U-Joints, stripped splines,
bent yokes, or other problems.
Also check to see if the shaft
itself is bent.
Repair and replace propeller
shafts and U-joints
(para. 6-2 through 6-4).
Check for tom boots on the
CV joints, stripped splines,
smooth joint operation, and
proper mounting torques.
For halfshaft maintenance
procedures, refer to para. 6-7.
Lubricate in accordance with
TM 9-2320-387-l
0.
i
Make sure the geared hubs turn
freely. Check mounting hardware
for proper installation.
Lubricate in accordance with
TM 9-2320-387-l
0.
If you haven’t found any faults,
check the differential fluid in
accordance wfth TM g-2320-387-10.
Otherwise, notify OS maintenance
(chapter 14).
TM 9-2320-387-24-l
DRIVETRAIN
GEARED HUB
TRANSFER
CASE
OUTPUT YOKE
PROPELLER
SHAFT
2-463
