REFERENCE INFORMATION
TM 9-2320-387-24-l
DRIVETRAIN
Check for tom boots on the CV joints, stripped
splines.
smooth
joint
operation,
and
proper
mounting torques.
Replace halfshafts and CV joints (para. 6-7).
Lubricate in accordance with TM Q-2320-387-10.
A[W
I
Check for smooth operation
of U-joints,
stripped
splines,
bent yokes,
or other
problems. Also check to see if the shaft
itself is bent. Replace propeller shafts or
U-joints (paras. 6-2 through 6-5).
Lubricate in accordance with TM Q-2320-387-10.
CV J&NT
BOOT
GEAR:D
HUB
TRANSFER
CASE
OUTPUT YOKE
Make sure the geared hubs turn freely.
Check mounting hardware for proper
installation.
Lubricate in accordance with TM 9-2320-367-l
0.
Replace geared hubs (para. 6-Q).
PROPELLER
SHAFT
DlFFERENTtAL
INPUT
2-457
