If the drivetrain system checks out OK, the
problem is either the transmission itself, the
shifter. of the modulator. The DRlVETFtAlN
tests are located in para. 2-43 of this manual.
- -I
Make sure that the detents in the shifter
correspond to the shift positions shown on
the plate. Have an assistant move the shifter
and look to see that the linkage is moving at
the transmission.
Linkage repair and adjustment procedures
are located in para. 5-Q.
i
Look for a TP sensor problem if the vehicle
was hot shifting. or was not shifting as well
as it should be.
Run the BRAKES and DRIVETRAIN
tests in
this manual. If you don’t find any faults, notify
DS maintenance
(chapter 14).
TM 9-2320-387-24-l
TRANSMISSION SYSTEM
GEARSHIR
2-391
