7-8. BRAKE PRESSURE LIMITER VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 239)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
• Hood raised and secured (TM 9-2320-387-10).
• Battery ground cables disconnected (para. 4-68).
Maintenance Level
Unit
a. Removal
CAUTION
Cover or plug all open lines and connections immediately after
disconnection to prevent contamination. Remove all covers or
plugs prior to connection.
NOTE
Have drainage container ready to catch brake fluid.
1.
Disconnect brake lines (6) and (7) from adapter fittings (8) on brake pressure limiter valves (1).
2.
Remove four adapter fittings (8) from two pressure limiter valves (1).
3.
Remove two capscrews (3), lockwashers (4), washers (5), and pressure limiter valves (1) from
bracket (2). Discard lockwashers (4).
b. Installation
1.
Install two pressure limiter valves (1) on bracket (2) with two washers (5), lockwashers (4), and
capscrews (3).
2.
Install four adapter fittings (8) on two pressure limiter valves (1).
3.
Connect brake lines (6) and (7) to adapter fittings (8) on brake pressure limiter valves (1).
TM 9-2320-387-24-1
7-28
Change 1
