TM 9-2320-362-14&P
3-16. HAND THROTTLE CABLE ADJUSTMENT
This task covers:
a. Hand Throttle Cable Adjustment
INITIAL SETUP:
Tools
Manual Reference
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Item 1, Section III,
Appendix B)
a. Hand Throttle Cable Adjustment
1.
2.
3.
4.
5.
Start engine
Note RPM and
Hand
NOTE
Normal idle is 650 RPM (± 25 RPM).
(TM 9-2320-280-10) and let engine come to idle.
shut engine off (TM 9-2320-280-10).
NOTE
throttle cable should be positioned with
no tension on cable.
Loosen nuts (1) and (3) and move hand throttle cable (2) until desired
position is obtained.
Tighten nuts (1) and (3) to secure hand throttle cable (2) in correct
position.
Start engine (TM 9-2320-280-10) and let engine come to idle.
Idle speed and operation of hand throttle cable (2) should be correct.
If incorrect, repeat steps 2 thru 4 or refer to table 3-2,
Troubleshooting malfunction 1.
3-30
