TM 9-2320-280-20-3
12-186. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)
12-304
Change 1
1.
Install rear shield (14) to rear-front crossmember (9) with three spacers (12), capscrews (10), six
washers (11), and three locknuts (13). Tighten locknuts (13) to 44 lb-ft (60 N•m).
2.
Install rear shield (14) on three mounting brackets (7) with three capscrews (8), six washers (6), and
three locknuts (5). Do not tighten locknuts (5).
3.
Install three mounting brackets (7) on rear-rear crossmember (3) with six spacers (15), capscrews (1),
twelve washers (2), and six locknuts (4). Tighten locknuts (4) to 24 lb-ft (33 N•m).
4.
Tighten three locknuts (5) to 24 lb-ft (33 N•m).
h. Rear Shield Installation
