Attach strap hooks (5) on strap buckles (6).
Materials/Parts
a. Removal
b. Installation
TM 9-2320-280-20-3
12-179. SIGHT BOX STRAPS REPLACEMENT (L119)
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
M1097, M1097A1, M1097A2
Six locknuts (Appendix G, Item 89)
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
NOTE
The sight box #1 straps and the sight box #2 strap are replaced
basically the same. This procedure covers the sight box #1 straps.
1. Remove strap hooks (5) from strap buckles (6).
2. Remove four locknuts (4), screws (1), two footman loops (3), and straps (7) and (16) from ammo
rack (2). Discard locknuts (4).
3. Remove two locknuts (10), screws (8), footman loop (9), and strap (7) from ‘C” beam (11). Discard
locknuts (10).
4. Remove two screws (15), washers (14), flat footman loop (13), and strap (16) from cargo floor (12).
Remove strap (16).
1. Slide strap (16) onto flat footman loop (13). Install flat footman loop (13) and strap (16) on cargo
floor (12) with two screws (15) and washers (14).
2. Slide strap (7) onto footman loop (9). Install footman loop (9) and strap (7) on ‘C” beam (11) with two
screws (8) and locknuts (10).
3. Slide straps (7) and (16) onto two footman loops (3). Install footman loops (3) and straps (7) and (16)
on ammo rack (2) with four screws (1) and locknuts (4).
4.
12-272
