a. Removal
TM 9-2320-280-20-3
b. Installation
12-156. EQUIPMENT RACK REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1038, M1038A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanics tool kit:
Tool chest straps removed (para. 12-157).
automotive (Appendix B, Item 1)
Troop seat support pad removed (para. 12-158).
Materials/Parts
Tape (Appendix C, Item 50)
Six lockwashers (Appendix G, Item 109)
Two locknuts (Appendix G, Item 76)
1. Remove six capscrews (3), lockwashers (4), and equipment rack (5) from cargo floor (6). Discard
l o c k w a s h e r s ( 4 ).
2. Remove two locknuts (1), washers (8), screws (7), and retainer bracket (2) from equipment
rack (5). Discard locknuts (1).
3. Remove tape from equipment rack (5).
1. Apply tape to equipment rack (5).
2.
3.
Install retainer bracket (2) on equipment rack (5) with two washers (8), screws (7), and locknuts (1).
Install equipment rack (5) on cargo floor (6) with six lockwashers (4) and capscrews
capscrew (3) to 15 lb-ft (20 Nm).
(3). Tighten
FOLLOW-ON TASKS: Install troop seat support pad (para. 12-158).
Install tool chest straps (para. 12-157).
12-247