TM 9-2320-280-20-3
10-39. DRIVER’S SEAT ASSEMBLY MAINTENANCE
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP:
Applicable Models
Materials/Parts
M966A1, M996A1, M997A1, M997A2,
Twelve lockwashers (Appendix G, Item 140)
M998A1, M1025A1, M1025A2, M1026A1,
M1035A1, M1035A2, M1038A1, M1043A1
Manual References
M1043A2, M1044A1, M1045A1, M1045A2,
TM 9-2320-280-24P
M1046A1, M1097A1, M1097A2
Equipment Condition
Tools
Driver’s seat assembly removed (para. 10-38).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
NOTE
Slide seat back and forth to gain access to slide set hardware.
1. Remove four nuts (12), loclwashers (11), capscrews (9), height adjuster (13), and cover (14) from
slide set (10). Discard lockwashers (11).
2. Remove four nuts (8), lockwashers (16), and seat (2) from riser (6). Discard lockwashers (16).
3. Remove four nuts (3), lockwashers (4), capscrews (15), riser (6), and tray (5) from slide set (10). Discard
lockwashers (4).
4. Remove two nuts (17), capscrews (19), loop (18), and strap (1) from riser (6).
5. Inspect velcro strip (7) on riser (6) for damage and replace if damaged.
b. Assembly
1. Install strap (1) and loop (18) on riser (6) with two capscrews (19) and nuts (17).
2. Install tray (5) and riser (6) on slide set (10) with four capscrews (15), lockwashers (4), and nuts (3).
3. Install seat (2) on riser (6) with four lockwashere (16) and nuts (8).
4. Install height adjuster (13) and cover (14) on slide set (10) with four capscrews (9), lockwashers (11),
and nuts (12).
10-66
