12-131.1. FRONT RADIO RACK UPPER MOUNTING BRACKETS REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove two capscrews (4), washers (5), and radio rack mounting brackets (6) from plenum (7).
2.
Remove nine screws (9), retainer (8), and plenum (7) from “A” beam (10).
3.
Remove four capscrews (3), washers (2), and two radio rack upper mounting brackets (1) from
“A” beam (10).
INITIAL SETUP:
Applicable Models
M966, M998, M1025, M1026, M1036, M1038,
M1043, M1044, M1045, M1046, M1121
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-24P
Equipment Condition
Radio rack assembly removed (para. 12-132).
b. Installation
1.
Install two radio rack upper mounting brackets (1) on “A” beam (10) with four washers (2) and
capscrews (3).
2.
Install retainer (8) and plenum (7) on “A” beam (10) with nine screws (9).
3.
Install two radio rack mounting brackets (6) on plenum (7) with two washers (5) and capscrews (4).
TM 9-2320-280-20-3
12-202.2
Change 1
