TM 9-2320-280-20-3
12-119. TROOP/CARGO WINTERIZATION TOP COVER ASSEMBLY REPLACEMENT
(Contd)
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
NOTE
When installing top cover assembly, ensure fastener straps are
installed on inside of enclosure.
Center and install top cover assembly (6) over top enclosure assembly (7), rear end closure
assemblies (13), and vehicle body (12).
Attach top cover assembly fastener strip (20) to cab top cover strip (19).
Install eight fastener straps (37) on bow assemblies (38).
NOTE
Top cover assembly is oversized to allow for shrinkage for proper fit.
Install top cover assembly (6) and two clamping strips (3) on two seals (8), channel (5), and rear end
closure assemblies (13) with fourteen screws (4).
Install top cover assembly (6) and two clamping strips (2) on two seals (10), outside corner plates (9),
and rear end closure assemblies (13) with six screws (1).
Install top cover assembly (6) and two clamping strips (14) on two seals (11) and rear end closure
assemblies (13) with sixteen screws (15).
Install top cover assembly (6) and clamping strip (28) on seal (34) and right rear vehicle body (31)
with eight capscrews (29) and nuts (33).
Secure top cover assembly (6) and clamping strip (28) to seal (34) and right end closure (32) with
screw (30).
Install top cover assembly (6) and plate assembly (26) on seal (34), fuel tank filler (27), and right
rear vehicle body (31) with three screws (25) and spring nuts (16) (if removed).
Install top cover assembly (6) and clamping strip (22) on seal (34) and right rear fixed door (23) with
six capscrews (24) and nuts (17).
Secure top cover assembly (6) and clamping strip (22) to seal (34) and right rear fixed door (23) with
capscrew (21) and nut (18).
Install top cover assembly (6) and clamping strip (44) on seal (46) and left rear vehicle body (41) with
ten capscrews (43) and nuts (39).
Install top cover assembly (6) and clamping strip (44) on seal (46) and left end closure (40) with
screw (42).
Install top cover assembly (6) and clamping strip (49) on seal (46) and left rear fixed door (45) with
six capscrews (48) and nuts (47).
Secure top cover assembly (6) and clamping strip (49) to seal (46) and left rear fixed door (45) with
capscrew (35) and nut (36).
12-184