bulkhead coupling supply line (3) with two clamps (2).
b. Installation
a. Removal
TM 9-2320-280-20-3
12-88. TROOP/CARGO WINTERIZATION HEATER BULKHEAD FUEL SUPPLY HOSE
REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1038, M1038A1
TM 9-2320-280-10
Tools
TM 9-2320-280-24P
General mechanics tool kit:
General Safety Instructions
automotive (Appendix B, Item 1)
Do not perform this procedure near fire, flames,
or sparks.
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
CAUTION
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior
to connection.
NOTE
Have drainage container ready to catch fuel.
Remove two clamps (2) and bulkhead fuel supply hose (4) from pump-to-bulkhead fuel supply line (1) and
bulkhead hose-to-bulkhead coupling supply line (3).
Connect bulkhead fuel supply hose (4) to pump-to-bulkhead fuel supply line (1) and bulkhead hose-to-
FOLLOW-ON TASK: Operate troop/cargo heater (TM 9-2320-280-10) and check for fuel leaks.
12-127
![](//www.tpub.com/assessment.jpg)