b. Installation
TM 9-2320-280-20-3
12-66. SWINGFIRE HEATER WATER JACKET TO PUMP AND TEE HOSES REPLACEMENT
(Cont’d)
1. Install clamps (16), (14), (7), (12), and (9) on inlet and outlet hoses (6) and (8).
2. Install outlet hose (8) on heater pump (13) with clamp (14).
3. Install inlet hose (6) on tee (11) with clamp (12).
4. Connect inlet hose (6) to water jacket (10) with clamp (7).
5. Connect outlet hose (8) to water jacket (10) with clamp (9).
6. Install support (2) on “A” beam (1) with screw (3).
7. Connect inlet and outlet hoses (6) and (8) with clamps (16) on support (2) with screw (4) and
nut (15).
8. Install three tiedown straps (5) on inlet and outlet hoses (6) and (8).
FOLLOW-ON TASKS: • Fill cooling system (para. 3-60).
• Install air horn (para. 3-14).
12-96
