a. Removal
b. Installation
TM 9-2320-280-20-3
12-59. SWINGFIRE HEATER BRUSHGUARD AND SHIELD ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
M966, M966A1, M996, M996A1, M997,
One mechanic
M997A1, M997A2, M998, M998A1, M1025,
One assistant
M1025A1, M1025A2, M1037, M1038, M1038A1
General Safety Instructions
Tools
Do not touch hot exhaust system components
General mechanics tool kit:
with bare hands.
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
WARNING
Do not touch hot exhaust system components with bare hands.
Severe injury will result.
Remove eight nuts (3), capscrews (1), washers (2), and brushguard and shield assembly (4) from cowl (5).
Install brushguard and shield assembly (4) on cowl (5) with eight washers (2), capscrews (1), and nuts (3).
12-86