TM 9-2320-280-20-3
11-208. HEATER MOUNTING BRACKET ASSEMBLY REPLACEMENT (M996, M996A1)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanics tool kit
Heater removed (para 11-209).
automotive (Appendix B, Item 1)
Materials/Parts
Eight rivets (Appendix G, Item 182)
NOTE
For instructions on replacement of rivets, refer to para. 10-66.
a. Removal
1. Remove two screws (1), clamps (2), and fuel line (3) from bracket (4).
2. Remove six screws (8) from NBC control box (9) and body (7), and pull control box (9) away for
access.
3. Remove eight rivets (6) and bracket (4) from body (5).
b. Installation
1. Install bracket (4) on body (5) with eight rivets (6).
2. Install fuel line (3) and two clamps (2) on bracket (4) with two screws (1).
3. Install NBC control box (9) on body (7) with six screws (8).
11-314