NOTE
TM 9-2320-280-20-3
11-192. HEATER FUEL FILTER REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M996, M996A1, M997, M997A1, M997A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 44)
Two lockwashers (Appendix G, Item 113)
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
l Stowage compartment door open
(TM 9-2320-280-10).
l Close fuel shut-off valve
(TM 9-2320-280-10).
General Safety Instructions
Diesel fuel is highly flammable. Do not perform
this procedure near fire, flames, or sparks.
a. Removal
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
l Have drainage container ready to catch fuel.
l Cover or plug all open connections immediately after disconnection
to prevent contamination. Remove all covers or plugs prior to
connection.
1. Disconnect two fuel lines (5) from filter (7) and allow fuel to drain.
2. Remove two nuts (4), lockwashers (3), washers (2), screws (8), filter (7), and spacers (1) from
panel (6). Discard lockwashers (3).
NOTE
Apply sealing compound to threads of all fuel line joints before
installation.
1. Install two spacers (1) and filter (7) on panel (6) with two screws (8), washers (2), lockwashers (3),
and nuts (4).
2. Connect two fuel lines (5) to filter (7).
11-278
