TM 9-2320-280-20-3
11-141. UPPER LITTER RACK STRIKER SUPPORT BRACKETS REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M997, M997A1, M997A2
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Upper litter rack striker removed (para. 11-139)
automotive (Appendix B, Item 1)
Materials/Parts
Fourteen rivets (Appendix G, Item 184)
NOTE
For instructions on replacement of rivets, refer to para. 10-66.
1. Remove two rivets (8) from upper bracket (1) and roof (2).
2. Remove four rivets (5) and support (3) with brackets (1) and (6) from roof (2) and body (4).
3. Remove four rivets (9) and upper bracket (1) from support (3).
4. Remove four rivets (7) and lower bracket (6) from support (3).
b. Installation
1. Install lower bracket (6) on support (3) with four rivets (7).
2. Install upper bracket (1) on support (3) with four rivets (9).
3. Install upper bracket (1) and support (3) on roof (2) with two rivets (8).
4. Install lower bracket (6) and support (3) on body (4) with four rivets (5).
11-208
