TM 9-2320-280-20-3
11-128. REAR DOOR LATCH ASSEMBLY AND GUIDE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1, M997, M997A1, M997A2
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanics tool kit
Rear door handles removed (para. 11-127).
automotive (Appendix B, Item 1)
Materials/Parts
Four rivets (Appendix G, Item 183)
NOTE
For instructions in replacement of rivets, refer to para. 10-66.
1. Slide latch assembly (7) down until upper latch rod (8) is out of upper guide (2). Slide latch
assembly (7) up until lower latch rod (6) is out of lower guide (5).
2. Remove four rivets (1), latch guide (2), and shims (3), if present, from door (4).
I
b. Installation
1. Install latch guide (2) and shims (3), if removed, on door (4) with four rivets (1).
2. Slide lower latch rod (6) into lower guide (5).
3. Insert
FOLLOW-ON
upper latch rod (8) into upper guide (2) and slide latch assembly (7) up to mounting
TASKS: l Install rear door handles (para. 11-127).
. Adjust latch rod brackets (para. 11-131).
position.
11-187
