TM 9-2320-280-20-3
11-124. SOFT TOP AMBULANCE LITTER ASSEMBLY MAINTENANCE
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Inspection
INITIAL SETUP:
Applicable Models
Personnel Required
M1035, M1035A1, M1035A2
One mechanic
One assistant
Tools
General mechanic’s tool kit:
Manual References
automotive (Appendix B, Item 1)
TM 9-2320-280-10
Special Tools
TM 9-2320-280-24P
Torque adapter (Appendix B, Item 145)
Equipment Condition
Tailgate lowered (TM 9-2320-280-10).
Materials/Parts
Ten locknuts (Appendix G, Item 58)
Two locknuts (Appendix G, Item 69)
Twenty three locknuts (Appendix G, Item 106)
Eight lockwashers (Appendix G, Item 108)
Eight nut and lockwasher assemblies
(Appendix G, Item 144)
Eight rivets (Appendix G, Item 186)
NOTE
For instructions on replacement of rivets, refer to para. 10-66.
1.
2.
3.
4.
5.
6.
7.
8.
Remove two capscrews (22) and washers (21) from litter assembly (1), spacers (20), and cargo
floor (26).
Remove two locknuts (11), washers (12), capscrews (24), and washers (12) from litter
assembly (1), spacers (25), and cargo floor (26). Discard locknuts (11).
Remove four locknuts (13), washers (14), capscrews (19), washers (14), and shims (17) from litter
assembly (1) and wheelhouses (10). Discard locknuts (13).
Remove four locknuts (15), washers (16), capscrews (23), washers (16), and shims (18) from litter
assembly (1) and wheelhouses (10). Discard locknuts (15).
Remove two locknuts (9), washers (5), eapscrews (4), and washers (5) from spacers (6), litter
assembly (1), and cargo floor (26). Discard locknuts (9).
Remove two locknuts (8), washers (3), capscrews (2), and washers (3) from spacers (’7), litter
assembly (1), and cargo floor (26). Discard locknuts (8).
Remove litter assembly (1) from vehicle.
NOTE
Note position of spacers for installation.
Remove spacers (6), (7), (20), and (25) from cargo floor (26).
11-176
