10-49.1. THREE POINT SEATBELT BRACKETS REPLACEMENT (M996, M996A1, M997,
M997A1, AND M997A2)
1.
Remove two nuts (6), capscrews (4) and (5), four washers (3), and bracket (2) from body (7) and
“B” pillar (1).
2.
Remove capscrew (11), washer (10), and bracket (8) from mount (9).
b. Installation
1.
Install bracket (8) on mount (9) with washer (10) and capscrew (11). Tighten capscrew (11) to
90-95 lb-ft (122-129 N•m).
2.
Install bracket (2) on body (7) and “B” pillar (1) with four washers (3), two capscrews (4) and (5), and
nuts (6). Tighten capscrews (4) to 9-11 lb-ft (12-15 N•m) and capscrews (5) to 20-22 lb-ft (27-30 N•m).
This task covers:
a. Removal
b. Installation
a. Removal
NOTE
Left and right seatbelt bracket replacement procedures are
basically the same. This procedure covers the left seatbelt bracket.
INITIAL SETUP:
Applicable Models
M996, M996A1, M997, M997A1, M997A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Three point seatbelt removed (para. 10-48.1).
TM 9-2320-280-20-3
10-82.2
Change 1
