TM 9-2320-280-20-2
3-39. RIGHT FUEL INJECTION LINES BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Engine access cover removed (para. 10-15).
automotive (Appendix B, Item 1)
Air horn removed (para. 3-14).
Manual References
TM 9-2320-280-24P
a. Removal
1. Remove two screw-assembled washers (6), clamps (5), and clamp (7) from bracket (1).
2. Remove two clamps (5) and inspect for cracks or breaks. Replace if defective.
3. Remove two nuts (3), washers (2), and bracket (1) from valve cover studs (4).
b. Installation
1. Install bracket (1) to valve cover studs (4) with two washers (2) and nuts (3). Tighten nuts (3) to
13-20 lb-ft (18-27 Nom).
2. Install two clamps (5) and clamp (7) to bracket (1) with two screw-assembled washers (6). Tighten
screw-assembled washers (6) to 3-4 lb-ft (4-5 N.m).
FOLLOW-ON TASKS: Install air horn (para. 3-14).
Install engine access cover (para. 10-15).
3-75
