TM 9-2320-280-20-2
8-11. REAR WHEEL TOE-OUT ALIGNMENT (Cont’d)
12.
13.
14.
Measurement must be 0-118 in. (0-3 mm). If measurement is not within specifications, perform
step 13. If measurement is within specifications. proceed to step 14.
Loosen two locknuts (2) securing clamps (9). Turn adjusting sleeve (10) until measurement is within
specifications. Roll vehicle forward then rearward and repeat steps 10 through 12 to ensure correct
adjustment.
Repeat steps 10 through 12 for opposite side.
15. Proceed to task b.
8-39
