TM 9-2320-280-20-2
8-6. RUNFLAT COMPRESSOR (P/N J39250) BELT REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanics tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Materials/Parts
Runflat belt repair kit
(Appendix G, Item 205)
a. Removal
NOTE
Note position of belt for installation.
1. Remove small pin (8) from belt (4) and worm gear shaft assembly (1). Discard small pin (8).
2. Remove shaft pin (7) and worm gear shaft assembly (1) from compressor assembly (6). Discard shaft
pin (7).
3. Remove two locknuts (5), sockethead screws (2), spacers (3), and belt (4) from compressor assembly (6).
Discard locknuts (5).
b. Installation
1.
2.
3.
NOTE
Belt overlap is to be positioned so that you have equal amount of
belt on each side of worm gear shaft assembly.
Install belt (4) on compressor assembly (6) with two spacers (3), sockethead screws (2), and lock-
nuts (5).
Install worm gear shaft assembly (1) on compressor assembly (6) with shaft pin (7).
Install belt (4) to worm gear shaft assembly (1) with small pin (8).
8-25
