NOTE
• Perform steps 1 through 3 for front support bracket.
• Perform steps 4 through 6 for rear support bracket.
1.
Remove two tiedown straps (8) from front brake lines (4) and intermediate brake line (11). Discard
tiedown straps (8).
2.
Remove two capscrews (7), washers (6), and clamps (5) from bracket (2).
3.
Remove nut (10), washer (9), capscrew (3), and support bracket (2) from crossmember (1).
4.
Remove capscrew (14), clamp (15), and brake line (13) from left support bracket (16).
5.
Remove capscrew (17), washer (18), and left support bracket (16) from frame bracket (12).
6.
Repeat steps 4 and 5 for right support bracket.
7-15. BRAKE LINES REPLACEMENT (Cont’d)
k. Caliper to Tee Support Brackets Removal
TM 9-2320-280-20-2
7-38
Change 2
NOTE
• Perform steps 1 through 3 for front support bracket.
• Perform steps 4 through 6 for rear support bracket.
1.
Install support bracket (2) on crossmember (1) with capscrew (3), washer (9), and nut (10).
2.
Install two clamps (5) on support bracket (2) with two washers (6) and capscrews (7).
3.
Secure front brake lines (4) and intermediate brake line (11) with two tiedown straps (8).
4.
Install left support bracket (16) on frame bracket (12) with washer (18) and capscrew (17).
5.
Install brake line (13) and clamp (15) on support bracket (16) with capscrew (14).
6.
Repeat steps 4 and 5 for right support bracket.
l. Caliper to Tee Support Brackets Installation
