TM 9-2320-280-20-2
3-30. FILLER SPOUT HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Fuel tank drained (para. 3-24).
automotive (Appendix B, Item 1)
General Safety Instructions
Manual References
Do not perform this procedure near fire, flames, or
TM 9-2320-280-10
sparks.
TM 9-2320-280-24P
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death will result.
a. Removal
1. Loosen clamps (4) and (3) securing hose (1) to fuel tank (5) and to filler spout (2).
2. Slide hose (1) on to filler spout (2) until disconnected from fuel tank (5). Remove hose (1) from filler
spout (2).
b. Installation
NOTE
Position clamps attaching filler hose to fuel tank as shown.
1. Install hose (1) on filler spout (2) and slide on filler spout (2) until the hose (1) clears fuel tank (5).
2. Connect hose (1) to fuel tank (5) and tighten clamps (3) and (4).
FOLLOW-ON TASK: Fill fuel tank (TM 9-2320-280-10) and check for leaks.
3-58
