TM 9-2320-280-20-2
7-3. PARKING BRAKE CALlPER AND ROTOR MAINTENANCE (Cont’d)
9.
10.
11.
12.
13.
14.
15.
7-8
NOTE
Avoid placing parking brake cable behind mounting bracket
when performing step 9.
Install caliper (11) and plate and guide-pin assembly (8) on caliper mounting bracket (9).
Apply sealing compound to threads of capscrews (2). Install plate and guide pin assembly (8) to
caliper mounting bracket (9) with two lockwashers (3) and capscrews (2). Tighten capscrews (2) to
90 lb-ft (122 Nom).
Install parking brake cable (7) on plate and guide pin assembly (8) with clamp (4), two washers (5),
capscrews (6), washers (5), and locknuts (10). Tighten locknuts (10) to 5 lb-ft (7 Nd).
Position rotor (12) to caliper (11).
Install clevis (19) to cam (17) with clevis pin (20), long end of spring (18), washer (21), and cotter
pin (l).
Install short end of spring (18) on pin post (16) and crimp short end of spring (18) with pliers.
Install rear propeller shaft (15) to rotor (12) with four lockwashers (13) and capscrews (14). Tighten
capscrews (14) to 60 lb-ft (81 N*m).
