TM 9-2320-280-20-2
4-125. HEAT/VENT CONTROL PANEL REMOVAL (M996, M996A1)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanics tool kit:
Battery ground cable disconnected (para. 4-73).
automotive (Appendix B, Item 1)
Heater compartment panel removal (para. 11-204).
Materials/Parts
Pushnut (Appendix G, Item 170)
1. Remove pushnut (1) from control arm (2) and blower duct arm (5). Discard pushnut (1).
2. Disconnect vent door control arm (3) from switch lever assembly (4).
3. Remove four screws (7), control panel (8), and control arm (2) from body (6).
b. Installation
1. Connect control arm (2) to switch lever assembly (4) and install control panel (8) on body (6) with
four screws (7).
2. Connect vent door control arm (3) to switch lever assembly (4).
3. Install control arm (2) on blower duct arm (5) with pushnut (1).
4-308