TM 9-2320-280-20-2
4-122. COMPRESSOR/HEATER FUEL PUMP WIRING HARNESS REPLACEMENT
(M997, M997A1, M997A2) (Cont’d)
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Install clamp (21) on harness (17) and body rail (7) with screw (20).
Connect harness lead (8) to fuel pump lead (9).
Install harness ground terminal (2) on ground stud (1) with lockwasher (3) and nut (4).
Install harness ground (19) on fuel pump (10) with washer (6), capscrew (18), washer (6), and locknut (5).
Install clamp (12) on harness (17) and install clamp (12) and fuel line clamp (13) on body
bracket (14) with screw (11), washer (15), and locknut (16).
Connect harness leads (22) to control box leads 436D (24) and 723B (23).
Install six clamps (31) on harness (17) and body (7) with six screws (30).
Install clamp (28) on harness (17), AC line clamp (29), and body (7) with washer (27), lockwasher (26),
and capscrew (25).
Secure harness (17) to drain tube (33) with tiedown strap (32).
Install grommet (34) on tunnel (35) and harness (17).
4-290
