TM 9-2320-280-20-2
4-112
Change 2
4-70. BACKUP LIGHT BRACKET REPLACEMENT
a. Removal
Remove two nuts (5), lockwashers (4), washers (3), capscrews (1) and bracket (6) from “D” beam (2).
Discard lockwashers (4).
NOTE
M1035A2 vehicles are equipped with four nuts, lockwashers,
washers, and capscrews.
INITIAL SETUP:
Applicable Models
M1035, M1035A1, M1035A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials Parts
Two lockwashers (Appendix G, Item 108)
Manual References
TM 9-2320-280-24P
Equipment Condition
Backup light assembly removed (para. 4-69).
Install bracket (6) on “D” beam (2) with two capscrews (1), washers (3), lockwashers (4), and nuts (5).
b. Installation
This task covers:
a. Removal
b. Installation
FOLLOW-ON TASK: Install backup light assembly (para. 4-69).
