TM 9-2320-280-20-2
4-30
Change 2
4-14. SPEEDOMETER/ODOMETER REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
a. Removal
b. Installation
1.
Remove four capscrews (9) from instrument cluster (4) and instrument panel (8).
2.
Pull instrument cluster (4) away from panel (8).
3.
Loosen large nut (2) on speedometer cable (7) and pull cable end out of speedometer (3).
4.
Remove two nuts (6), speedometer retaining bracket (5), and speedometer (3) from instrument
cluster (4).
1.
Install speedometer (3) and speedometer retaining bracket (5) on instrument cluster (4) with two
nuts (6). Tighten nuts (6) to 8 lb-in. (1 N•m).
2.
Install speedometer cable (7) into back of speedometer (3), ensuring core (1) engages in square hole
in speedometer (3), and tighten cable nut (2).
3.
Install instrument cluster (4) to panel (8) with four capscrews (9).
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
