4-4.1. ALTERNATOR MOUNTING BRACKETS
REPLACEMENT (Contd)
This task covers:
a. Removal
b. Installation
a. Removal
b. Installation
Remove two flanged-head capscrews (3), long flanged-head capscrew (2), and mounting bracket (1)
from engine (4).
Install mounting bracket (1) on engine (4) with two flanged-head capscrews (3) and long flanged-head
capscrew (2). Tighten capscrews (3) and (2) to 48 lb-ft (65 N•m).
INITIAL SETUP:
Applicable Models
M1123 and “A2” series vehicles only
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Manual References
TM 9-2320-280-24P
Equipment Condition
• 200 ampere alternator removed (para. 4-109 or
4-110).
• Tensioner, idler pulleys, and mounting hardware
removed (para. 3-84).
• Power steering pump removed (para. 8-24).
TM 9-2320-280-20-2
4-10.2
Change 2
