REFERENCE INFORMATION
1. Start engine
2. Hold down brake pedal and move transmission
shift lever through ail ranges including reverse.
3. Engage parking brake and place shift lever in
neutral. Check fluid level on dipstick.
4. Proper level is between FULL and ADD marks
on dipstick
NOTE
Check fluid for a burnt smell, grit, discoloration, air
bubbles, or a milky appearance.
o Burnt smell, discolration, or grit indicates worn
or damaged internal components. Notify DS
maintenance.
o Bubbles indicate of an overfilled system or air
leaks in the syetem. Drain the fluid and refill to
proper level, refer to (para 5-2).
o Milky appearance is due to watar in the system.
Replace fluid, and replace fifter.
If the speedometer works, but the vehicle doesn't
move, the transmission is OK and the problem is in
the final drive. Most likely the fault is in the splined
output shafts of the transfer case. Listen for unusual
noise.
TM 9-2320-280-20-1
DRIVETRAIN
2-481
