TM 9-2320-280-20-1
TURN SIGNAL SWITCH
LIGHTS
1. WITH THE SWITCH IN THE ’LEFT” POSITION, YOU SHOULD HAVE CONTINUITY FROM PIN “H” TO PINS “B” AND
“C”, PIN “D” TO “E”, AND PIN “F” TO “G”.
2. WITH THE SWITCH IN THE “RIGHT” POSITION, YOU SHOULD HAVE CONTINUITY FROM PIN “H” TO PINS “A” AND
“E”, PIN “C” TO “D”, AND PIN “F TO “G”.
LEFT TURN
NOTE
l IF VEHICLE IS EQUIPPED WITH BRAKE LIGHT OVERRIDE
DIRECTIONAL SIGNAL CONTROL ASSEMBLY (P/N12339312-1),
REFER TO STEP 3.
l IF VEHICLE IS EQUIPPED WITH DIRECTIONAL SIGNAL
CONTROL ASSEMBLY (P/N 12339312), REFER TO STEP 4.
3. WITH SWITCH IN HAZARD POSITION, YOU SHOULD HAVE CONTINUITY FROM PIN H TO PINS “A”, “B”, “C”, “D”,
AND “E” AND PIN “F” TO “G”.
4. WITH SWITCH IN HAZARD POSITION, YOU SHOULD HAVE CONTINUITY FROM PIN H TO PINS “A”, “B”, “C”. AND
“E” AND PIN “F” TO “G”.
HAZARD
2-397/(2-398 Blank)
