TM 9-2320-280-10
d. Removal of Rear Curtain.
(1) Detach four curtain straps (11) from footman loops (13) on wheelhousings (15) and cargo floor (14)
by depressing locking tabs (12).
NOTE
Perform step 2 if vehicle is equipped with four-man arctic cab.
(2) Peel curtain (2) back from fastener tape (3).
(3) Unfasten eyelets (10) from turnbuttons (16) on "C" pillar (1).
NOTE
Perform step 4 for vehicles equipped with three-point seatbelts.
(4) Unfasten eyelets (7) from turnbuttons (8) on rear seatbelt bracket (9).
(5) Remove curtain (4).
e. Installation of Rear Curtain.
(1) Install curtain (4) on “”C” pillar (1) by fastening eyelets (10) to turnbuttons (16).
NOTE
Perform steps 2 and 3 when installing new curtain on vehicles with three-point seatbelts.
Ensure P/N 12342475 is used for replacement of rear curtain on vehicles equipped with three-
point seatbelt.
(2) Cut away inside curtain panel (17) and remove curtain panel (17) from curtain (4).
(3) Cut away outside curtain panel (6) and remove curtain panel (6) from curtain (4).
(4) Extend rear seatbelt bracket boot (5) and install over rear seatbelt bracket (9).
(5) Fasten eyelets (7) to turnbuttons (8) on rear seatbelt bracket (9).
NOTE
Perform step 6 if vehicle is equipped with four-man arctic cab.
(6) Attach curtain (2) to fastener tape (3).
(7) Attach four curtain straps (11) to footman loops (13) on wheelhousings (15) and cargo floor (14).
Tighten straps (11) equally, but do not overtighten.
2-176
