TM 9-2320-280-10
d. Removal of Rear Curtain.
(1) Detach curtain straps (5) from footman loops (7) behind seats by depressing locking taps (6).
NOTE
Perform step 2 if vehicle is equipped with two-man arctic cab.
(2) Peel curtain (4) back from fastener tape (8).
(3) Unfasten eyelets (3) from turnbuttons (2) on "B" pillar (1).
(4) Remove rear curtain (4).
e. Installation of Rear Curtain.
(1) Install rear curtain (4) to "B" pillar (1) by fastening eyelets (3) to turn buttons (2).
NOTE
Perform step 2 if vehicle is equipped with two-man arctic cab.
(2) Attach curtain (4) to fastener tape (8).
(3) Attach curtain straps (5) to footman loops (7) located behind seats. Tighten straps (5) equally, but do
not overtighten.
f. Installation of Cab Roof Cover, Rails, and Bow Assembly.
(1) Install two horizontal rails (12) on “A" pillar (13) and "B" pillar (1), and secure with four screws (9).
The short end of horizontal rails (12) go toward front of vehicle.
(2) Loosen end bracket screws (14) and install bow assembly (11) on horizontal rails (12) and secure
with four screws (10). Retighten bracket screws (14).
(3) Slide cab roof cover (18) into channel (15) on “A" pillar (13) and roll cab roof cover (18) over cab.
(4) Install cab roof cover (18) over rear curtain (4) at “B" pillar (1) and fasten eyelets (3) to turnbuttons
(2) on "B" pillar (1) and "A" pillar (13).
(5) Position cab roof cover (18) around horizontal rails (12) and fasten eyelets (16) to turnbuttons (19).
Secure cab roof cover (18) to bow assembly (11) with hook and loop attachments (17).
2-170
