TM 9-2320-280-10
2-16. SEATBELT OPERATION
a. Two-Point Seatbelt.
WARNING
Ensure all slack from two-point seatbelt adjusting strap is removed. Two-point seatbelt
retracts but does not lock in any position. Injury to personnel will result if an accident
occurs and two-point seatbelt is not in use or adjusted properly.
(1) Seatbelt Fastening. Pull seatbelt (1) across body and fasten strap in belt buckle (3).
(2) Seatbelt Adjustment. Pull adjustable strap (4) to remove slack from seatbelt (1). Seatbelt (1)
must fit snugly across operator’s hips.
(3) Seatbelt Unfastening. Push release button (2) on belt buckle (3) to release seatbelt (1).
b. Three-Point Seatbelt.
WARNING
Ensure all slack from three-point seatbelt is removed. Three-point seatbelt retracts and
will lock only during sudden stops or impact. Injury to personnel will result if an accident
occurs and three-point seatbelt is not in use or adjusted properly.
(1) Seatbelt Fastening. Pull shoulder harness and seatbelt (6) across body and fasten latch plate (5)
to belt buckle (3).
(2) Seatbelt Adjustment. Pull shoulder harness strap (6) through latch plate (5) and remove slack
from seatbelt (6). Seatbelt (6) must fit snugly across operator’s hips, shoulder, and chest.
(3) Seatbelt Unfastening. Push release button (2) on belt buckle (3) to release seatbelt (6).
2-116
