TM 10-5411-231-13&P
CARGO BED COVER (CBC) HMMWV, TYPE I
0014 00
CAB ACCESS DOOR
THIS WORK PACKAGE COVERS:
Remove, Replace
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Screws 10-24 x 5/8 lg;
Tools and Special Tools
Washers #10; Nuts 10-24
Drill with 1/8” Bit
Self-Lock; Cab Access Door
P/N 104002; Sealing
Compound P/N 700145
GENERAL
This procedure contains information and instructions to keep CBC cab access door assemblies in good
working order by removing and replacing damaged parts or the entire cab access door.
REMOVAL
1. Using drill (see WP 0023 00, Table 0023 00-2, Item 3), drill out eleven pop rivets (1) holding the
upper track (2) to the CBC shell. Remove track and then remove both door halves (3).
REPLACE
1. Apply sealer across entire back of track.
2. Set door halves into rail of lower track (4). Set upper track (2) with sealer applied on top of door
halves against CBC. Fasten with eleven screws, nuts and washers. Tighten securely.
END OF TASK
0014 00-1/2 blank
