TM 9-2330-392-14&P
3-4
Change 2
Table 3-1. Operator Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Clean contacts as required.
Step 2.
Check for loose or broken wires or loose connection at affected light.
Notify Unit maintenance.
3.
DIM OR FLICKERING LAMPS.
Step 1.
Check intervehicular power cable connector for dirty or corroded contacts.
Clean contacts as required.
Step 2.
Check for loose wires or connection at affected light.
Notify Unit maintenance.
BRAKE SYSTEM
4.
BRAKES WILL NOT RELEASE.
Step 1.
Ensure that handbrake levers are fully released (raised position).
Release handbrake levers.
Step 2.
Check that breakaway lever is not engaged.
Reset breakaway lever.
Notify Unit maintenance.