TM 9-2330-392-14&P
Change 2
4-101
4-36
LUNETTE REPLACEMENT (Cont).
e.
INSTALLATION
1.
Install lunette assembly (5) with attached damper (9) and spacers (8) into actuator housing (3).
NOTE
5/8 deep well socket will be pushed out as master pin is installed.
2.
Install master pin (1) through lunette assembly (5), damper (9), spacers (8), and actuator (3). Torque master pin
(1) to 50 ft-lbs. (68 Nm), then back off 1/4 turn.
3.
Secure master pin (1) with washer (4) and new cotter pin (2).