TM 9-2320-387-24-2
1526.
ENGINE REMOVAL (Contd)
I
21.
22.
23.
24.
25.
26.
27.
Remove four capscrews (15), washers (13), and lockwashers (14) from plate (12) and splash shield
bracket (6). Discard lo&washers (14).
Remove two hex-head screws (lo), plate (12), and spring nuts (11) from headlight homing (9).
Remove four nuts (29), screws (28), and harness connector (30) from Plate (12).
&move locknut (ES),
washer (7), capscrew (18), and washer (17) from right splash shield (1) and
support bracket (16). Discard locknut (8).
NOTE
Perform
steps 25 and 26 for Ml113 models only.
Remove locknut (23). washer (24), washer (22), two capscrews (19), washers (20), and chmP (21)
from right splash shield (1) and airI% bracket (5). Discard locknut (23).
Remove locknut (26), washer (25), capscrew (2), and vent line clamp (27) from right splash
shield (1). Discard locknut (26).
Remove screw (3), washer (4), and right splash shield (1) from airlift bracket (5).