12-33. REAR WINCH REPLACEMENT
This task covers:
mechanics tool kit:
Battery ground cables disconnected (para. 4-68).
General Safety Instructions
Winch must be supported during removal and
automotive (Appendix B, Item 1)
RTV sealant (Appendix C, Item 74)
Locknut (Appendix G, Item 162)
Winch must be supported during removal and installation. Failure
to support winch may result in injury to personnel or damage to
1 a. Removal
Remove nut (3) and power lead (2) from solenoid pack power stud (1).
Remove four nuts EQ, capscrews (6), cover (7), and control receptacle (4) from bracket (5).