11-76. SHELTER SUPPORT REINFORCEMENT
This task covers:
General mechanics tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Two capscrews (Appendix G, Item 18)
Two lockwashers (Appendix G, Item 225)
Tailgate lowered (TM 9-2320-387-10).
1 a. Removal
. It may be necessary to detach cab rear panel straps and turnbuttons
and roll cab rear panel upward to gain access to front support
. Note number and location of shims prior to removal for installation.
Remove two capscrews (71, lockwashers (61, washers (51, reinforcement (41, and shims (31, if present, from
mounting bracket (2) and support assembly (1). Discard capscrews (7) and lockwashers (6).
Install shims (31, if removed, and reinforcement (4) on support assembly (1) and mounting bracket (2)
with two washers (5), lockwashers (61, and capscrews (7). Tighten capscrews (7) to 90 lb-ft (122 Nom).
TASK: Raise and secure tailgate (TM 9-2320-387-10).