33-14. RIGHT REAR FLOOR PANEL REPAIR (Contd)
TM 9-2320-387-24-2
33-100
Change 1
1.
Position metal strip E (1), with arrow facing up and toward metal strip C (3), on insert panel (2)
and align reference lines (4).
2.
Using metal strip E (1) as a template, locate, mark, and drill seven 0.187-in. (4.75-mm) diameter
holes through insert panel (2). Remove metal strip E (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (2) and metal strip E (1).
4.
Position metal strip E (1) on insert panel (2) and install with seven rivets (5).
5.
Remove any adhesive residue and clean edges of metal strip E (1) and insert panel (2).
h. Metal Strip E and Insert Panel Assembly
DRILL SEVEN 0.187-IN. (4.75-MM)
DIAMETER HOLES