33-12. LEFT REAR FLOOR PANEL REPAIR (Contd)
TM 9-2320-387-24-2
33-60
Change 1
1.
Position metal strip F (1), with arrow facing up and toward metal strip C (3), on insert
panel (2). Align reference lines (3).
2.
Using metal strip F (1) as a template, locate, mark, and drill ten 0.187-in. (4.75-mm) diameter holes
in insert panel (2). Remove metal strip F (1).
3.
Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert
panel (2) and metal strip F (1).
4.
Position metal strip F (1) on insert panel (2) and install with ten rivets (4).
5.
Remove any adhesive residue and clean edges on metal strip F (1) and insert panel (2).
j. Metal Strip F and Insert Panel Assembly
DRILL TEN 0.187-IN. (4.75-MM) DIAMETER HOLES